home

Google TorcUP South Pacific
about usnewsresourcesfaqcontactservice and calibration
TU series square drive hydraulic wrenches
TX low clearance profile hydraulic torque wrenches
Raptor pneumatic torque wrench series
EP AP electric air power packs hydraulic torque wrench series
Complimentary Products
torcUP TU series square drive hydraulic wrenches
TU torque wrench series overviewTU hydraulic torque tool series features
TU hydraulic torque wrench product specificationsTU hydraulic torque series wrench applications
TX low clearance profile hydraulic torque wrenches
TX low profile clearance hydraulic torque wrenches product overviewTX low profile clearance hydraulic torque wrench features
TX low profile clearance hydraulic torque wrench specificationsTX low profile clearance hydraulic torque wrench features
Raptor pneumatic torque wrench series
Raptor pneumatic torque wrench series product overviewRaptor pneumatic torque wrench product features
Raptor pneumatic torque wrench series specificationsRaptor pneumatic torque wrench applications
EP AP electric air power packs hydraulic torque wrench series
EP AP electric air power packs hydraulic torque wrench overviewEP AP electric air power packs hydraulic torque wrench features
EP AP electric air power packs hydraulic torque wrench specificationsEP AP electric air power packs hydraulic torque wrench applications
Complimentary Products
overviewfeatures
specificationsapplications
warranty inforequest demo or brochure
TorcUP Complimentary Bolting Tool Products overviewspecificationsfeaturesmanualcatalog

BLM Ultrasonic Controller Specifications

TBW SERIES BACKUP | TFS SERIES FLANGE SPREADER | TN SERIES NUT SPLITTER
BLM ULTRASONIC CONTROLLER | INDUSTRIAL IMPACT SOCKETS | TURBINE TOOLING


BLM Series Ultrasonic Bolt Measurement

PHYSICAL
MEASURING
TRANSDUCER
Size:
Width (2.5in/63.5 mm)
Height (6.5 in/165 mm)
Depth (1.24 in/31.5 mm)

Weight:
13.5 ounces (with batteries).

Keyboard:
Membrane switch pad with
twelve tactile keys.

Operating Temperature:
14 to 140F (-10C to 60C)

Case:
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).

Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.

Display:
1/8in VGA grayscale display (240 x 160 pixels).  Viewable area 2.4 x 1.8in (62 x 45.7mm). EL backlit (on/off/auto).
Range:  From 1” to 48” (25.4mm to 122cm) bolts.

Time: Nanoseconds.

Elongation: Change in length (inches/millimeters).

Load: Force load applied (pounds kIP or kN Killonewtons).

Stress: Force for unit area stress applied (pounds kPSI or megapascals MPa).

Strain %: percentage strain applied (inches per inch or millimeters per millimeter)

Resolution:
+/- .00001 inches (0.0001 mm)
Transducer Types:
Single Element (1 to 10 MHz & 1/8” to 1” diameters).

Locking quick disconnect
“00” LEMO connectors.

Standard 10 foot cable. 

Custom transducer cable lengths available on request.

Temperature probe for automatic temperature compensation.
ULTRASONIC SPECIFICATIONS
VELOCITY RANGE
FEATURES
Measurement Modes:
Pulse-Echo (standard)
Pulse-Echo w/Gate (fine adjust)

Pulser:
Square wave pulser with adjustable pulse width (spike, thin, wide).

Receiver:
Manual or Auto Set gain control with 40dB range.

Timing:
10 bit 250 MHz digitizer
.0492 to .3936 in/ms
1250 to 9999 meters/sec

Fixed, Single, and Two point zero calibration options.

Select bolt material types from a preset or custom list.

Units:
English & Metric / Fahrenheit & Centigrade.

Setups:
64 custom user defined setups.  Factory setups can also be edited by the user.

Gate:
Gate used to fine adjust where the detection point occurs.

Alarm Limits:
Set hi and lo tolerances with audible beeper, viewable scan bar, and visual LEDs.

Auto Set:
Locates the detection signal, optimizes the gain setting, and adjusts the overall display to show the waveform and detection point automatically.

Field Calibration:
Vector & linear regression.   
Certification
Factory calibration traceable to national standards.

Warranty:
13 Month Limited

POWER SOURCE
DISPLAY
 

Three 1.5V alkaline or
1.2V NiCad AA cells.

Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)

Auto power off if idle 5 min.

Battery status icon.

A-Scan:
Rectified +/- (half wave view), or RF (full waveform view).

Large Digits:
Display and toggle between nanoseconds, elongation, load, stress, and strain. 
Digit Height:  0.400 in (10mm).

Limits Bar(alarm limits):
Set Hi & Lo alarm limits for displaying an acceptable tolerance range.

Repeatability Bar Graph:
Bar graph indicates stability of measurement.

Data Logger (Internal):
Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress, and strain for each reading.

Memory:
16 megabit non-volatile ram.

 


 

Back to top of page

 


 

 

TU SERIES | TX SERIES | RP SERIES | EP/AP SERIES | CP SERIES | ABOUT US | NEWS
RESOURCES | FAQ | CONTACT | SERVICE & CALIBRATION |
SITEMAP

TorcUP South Pacific Headquarters | 3C The Crossway Campbellfield, Victoria Australia 3061 | Phone International: +61 3 9357 6579 (sales and service)
Fax International: +61 3 9357 6578 (sales and service) | Local Phone: 1300 880 291 | Local Fax: 1300 883 683
Hydraulic Torque Wrench | Hydraulic Wrench | Torque Tool | Torque Flanges | Impact Socket | Nut Splitter | Torque Tools | Torque Bolt
Pneumatic Torque Wrench | Square Drive Hydraulic | Electric Power Pack | Air Power Pack | Torque Wrenches | TorcUP | Nut Splitter